Usage

• Mark a line from one side of the tire to the other side, passing through the center of the puncture, in the direction of rotation of the tire.
• Mark the patch with a centerline to match the center of the patch with the center of the puncture.
• Place the patch over the puncture and draw an outline 1 cm outside the patch edge.
• Using a coarse wire brush or a circular steel wire brush, roughen the area inside the outline on the tire.
• Remove the debris using a brush or a vacuum cleaner.
• Apply rubber cement evenly on the patch and let it dry according to the instructions. Then bond the patch onto the tire surface using a suitable adhesive such as SV.